AXEON BT-Series User Manual

Page 7

Advertising
background image

BT – Series User’s Manual
MKTF - 206

3. Be certain that all of the components of the feed water are soluble

concentrations attained in the system.

NOTE: FEED LINE MUST BE

PERMEATE (PRODUCT WATER) CONNECTION

Locate the 3/8” tubing labeled permeate and attach to storage tank
permeate water can flow freely
irreversible damage to the membrane elements.
the holding tank with PVC fittings, or other FDA approved materials
material being used does not di

CAUTION THE PH OF THE REVERSE O

TYPICALLY BE 1-2 POINTS LOWER THAN THE FEED WATER PH. A LOW PH CAN
BE VERY AGGRESSIVE TO SOME PLUMBING MATERIALS SUCH AS COPPER
PIPING.

CONCENTRATE (WASTE WATER)

Locate the 3/8” tubing labeled
concentrate line to an open drain in a free and unrestricted manner (no backpressure).

CAUTION: ANY RESTRICTIONS OR BLOCKAGE IN THE DRAIN LINE CAN

CAUSE BACKPRESSURE, WHICH WILL INCREASE THE SYSTEM’S OPERATING
PRESSURE. THIS CAN RESULT IN DAMAGE TO THE SYSTEM’S MEMBRANES AND
COMPONENTS.

ELECTRICAL

The motor used on the BT-
in 110/220 Volt 50/60 Hertz 1 P
electrical cord. 110V model

Ensure that the electrical circuit supplying the system is compatible with the
requirements of the specific B

7

Be certain that all of the components of the feed water are soluble
concentrations attained in the system.

NOTE: FEED LINE MUST BE MINIMUM 1/2” INCH.

PERMEATE (PRODUCT WATER) CONNECTION

labeled permeate and attach to storage tank.

permeate water can flow freely with no backpressure. Backpressure can cause

damage to the membrane elements. The 3/8” permeate line

with PVC fittings, or other FDA approved materials.

material being used does not dissolve into the permeate water.

THE PH OF THE REVERSE OSMOSIS PERMEATE WATER WILL

2 POINTS LOWER THAN THE FEED WATER PH. A LOW PH CAN

BE VERY AGGRESSIVE TO SOME PLUMBING MATERIALS SUCH AS COPPER

CONCENTRATE (WASTE WATER) CONNECTION

labeled concentrate and attach the tubing to a

to an open drain in a free and unrestricted manner (no backpressure).

CAUTION: ANY RESTRICTIONS OR BLOCKAGE IN THE DRAIN LINE CAN

BACKPRESSURE, WHICH WILL INCREASE THE SYSTEM’S OPERATING

PRESSURE. THIS CAN RESULT IN DAMAGE TO THE SYSTEM’S MEMBRANES AND

-Series systems is a carbonator motor. The motor is

60 Hertz 1 Phase. Each BT-Series system is equipped with a 5 foot

110V models are equipped with a plug.

nsure that the electrical circuit supplying the system is compatible with the

uirements of the specific BT model you are installing.

06/12

Be certain that all of the components of the feed water are soluble at the

. Ensure that the

Backpressure can cause

3/8” permeate line can be run to

. This is so the

SMOSIS PERMEATE WATER WILL

2 POINTS LOWER THAN THE FEED WATER PH. A LOW PH CAN

BE VERY AGGRESSIVE TO SOME PLUMBING MATERIALS SUCH AS COPPER

a drain. Run the

to an open drain in a free and unrestricted manner (no backpressure).

CAUTION: ANY RESTRICTIONS OR BLOCKAGE IN THE DRAIN LINE CAN

BACKPRESSURE, WHICH WILL INCREASE THE SYSTEM’S OPERATING

PRESSURE. THIS CAN RESULT IN DAMAGE TO THE SYSTEM’S MEMBRANES AND

The motor is available

system is equipped with a 5 foot

nsure that the electrical circuit supplying the system is compatible with the

Advertising