BlackVue Integrated V.2.00 - Manual (Page 12)

10
BlackVue Usage Installation
5.
Organize the power cable.
Use the provided cable clips if necessary.
6.
Adjust the position of the BlackVue's
camera lens.
Install the product in such a way that
the BLACKVUE logo in the button
section faces slightly lower than the
level.
Check the stored data af ter test
driving, and adjust the position of the
lens if necessary.
If you connect the product to portable
video devices (smar tphone, GPS
navigator, etc.), you can adjust the lens
angle checking video. (
X See Page 11)
7.
Start the engine.
Check to see if the product is properly
installed.
If the BlackVue's LED is turned on, it is
properly installed.
The type of LED may vary depending
on the model.

BlackVue_Eng_0726.indd 10 2012-07-26 �� 4:00:47