BlackVue Integrated V.2.00 - Manual (Page 13)

11
Connecting the BlackVue to AV Product
Video OUT Cable Video IN Cable*
Or
1.
Connect the BlackVue's [VIDEO OUT] terminal, to the AV product using
the Video OUT/IN cable (accessory).
You can check the BlackVue's real-time video on the connected AV
product.
If you use the BlackVue's [VIDEO OUT] port, you can reduce the video
frame rate.
The Video IN* cable may not be compatible with certain GPS navigators.
Check the compatibility before use.
When connected to the white connector of the
Video IN cable*
When connected to the yellow connector of the
Video IN cable*
Ground Video Ground Video
Disconnecting from the Holder
1.
Pull the BlackVue's main body holding down the [LOCK] button on the
mount as shown in the picture.
2.
The BlackVue's main body will be easily disconnected from the mount.
Connect to the Mount : Insert the BlackVue's main body into the groove
on the mount until the ‘click’ sound.
BlackVue_Eng_0726.indd 11 2012-07-26 �� 4:00:47