BlackVue Integrated V.2.00 User Manual
Page 33
31
Advanced Settings of Sensitivity
Press the Advanced Setting for each setting. You can easily set sensitivity
viewing recorded video.
1.
Load a recorded file (
). Play the loaded file (
).
2.
Set sensitivity viewing the video being played. Adjust the sensor area
by moving the control bar up and down. (
)
X
If the sensor area is wide, "insensitive", and if it's narrow, "sensitive".
If you want to record
the current event
If you don't want to record
the current event
Narrow the sensitivity area so that
the current G-sensor graph is out of
the sensor area.
Widen the sensitivity area so that
the current G-sensor graph is within
the sensor area.
If an image appears where event recording is triggered by the sensitivity
set by the user, the frame of the video playing screen blinks.
3.
Press the [Save & Close] button.
BlackVue_Eng_0726.indd 31
2012-07-26 �� 4:00:52