BlackVue Integrated V.2.00 - Manual (Page 26)

24
BlackVue Software Configuring BlackVue Settings
1.
Insert the Micro SD card into your PC. (X See Page 16)
2.
Press the button, and the Configuration window will appear.
You cannot set configuration if the SD card with the BlackVue Firmware
installed is not connected to the PC.
3.
Customize your BlackVue experience.
4.
Press the [Save & Close] button.
You cannot set configuration for BlackVue if the settings are not saved in
the Micro SD card.
Press the [Initialize Settings] button, and the settings will be initialized.
5.
Remove the Micro SD card with the settings saved from the PC, and
insert the card into the BlackVue.
The settings will be automatically saved into the BlackVue.
BlackVue_Eng_0726.indd 24 2012-07-26 �� 4:00:51