Pairing/unpairing the mobile phone – BMW 2012 5 Series User Manual

Page 231

Advertising
background image

Notes

At high temperatures, the charge function of the
mobile phone can be limited where appropriate
and the functions are no longer executed.
When the mobile phone is used via the vehicle,
heed the operating manual of the mobile phone.

Pairing/unpairing the mobile

phone

General information

The following functions are available:

Use of a mobile phone as a telephone.

Use of a mobile phone as an additional tele‐
phone.

Use of a mobile phone as an audio source.

Use of an audio device as an audio source,
refer to page

216

.

Requirements

The mobile phone is suitable.

The mobile phone is ready for operation.

Bluetooth is activated in the vehicle and on
the mobile phone.

Bluetooth presettings may need to be made
on the mobile phone, e.g., for a connection
without confirmation or visibility, refer to the
mobile phone operating instructions.

Deactivate Bluetooth audio if necessary.

A number with at least four and a maximum
of 16 digits was defined as the Bluetooth
passkey. It is only required once for pairing.

The ignition is switched on.

Activating/deactivating Bluetooth

Bluetooth is not permitted everywhere. Comply
with all safety guidelines and regulations.

1.

"Telephone"

2.

"Options" Open.

3.

"Bluetooth®"

Additional functions

Activating/deactivating the additional

functions

Activate the functions before pairing to be able
to use them in the vehicle. Information on suit‐
able mobile phones, refer to page

230

, that sup‐

port these functions.

1.

"Telephone"

2.

"Bluetooth® (phone)"

3.

"Options" Open.

4.

"Configure Bluetooth®"

5.

Select the desired additional function.

"Additional telephone"

"Office"

"Bluetooth® audio"

6.

"OK"

As long as an additional function is deactivated,
it cannot be assigned to a telephone.

Additional telephone

A mobile phone can be used as an additional
telephone.
The additional telephone can be used to accept
incoming calls, refer to page

234

. While a call is

active on the additional telephone, incoming
calls are displayed on the Control Display.

Audio source

A mobile phone can be used as an audio source.

Pairing and connecting cell phone

Pairing the mobile phone
To avoid becoming distracted and posing

an unnecessary hazard both to your own vehi‐
cle's occupants and to other road users, only
pair the mobile phone while the vehicle is sta‐
tionary.◀

Seite 231

Telephone

Communication

231

Online Edition for Part no. 01 40 2 607 879 - 09 11 490

Advertising