BMW 2012 5 Series - Manual (Page 33)

4. Open "Guest".
5. Create the settings.
Note: the guest profile cannot be renamed.
Display profile list during start
The profile list can be displayed during each
start for selecting the desired profile.
1. "Settings"
2. "Profiles"
3. "Options" Open.
4. "Display user list at startup"
Personal Profile settings
The following functions and settings can be
stored in a profile.
More information on the settings can be found
under:
▷ Active Cruise Control: collision warning, re‐
fer to page
120 .
▷ Exterior mirror position, refer to page 55 .
▷ CD/Multimedia, refer to page 200 : audio
source listened to last.
▷ Dynamic Driving Control: sport program, re‐
fer to page
112 .
▷ Driver's seat position, refer to page 35 : au‐
tomatic retrieval after unlocking.
▷ Programmable memory buttons, refer to
page
20 : assignment.
▷ Head-up Display, refer to page 137 : selec‐
tion, brightness and position of the display.
▷ Headlamp courtesy delay feature, refer to
page
90 : time setting.
▷ Tone, refer to page 190 : tone settings.
▷ Automatic climate control, refer to
page
139 : settings.
▷ Steering wheel position, refer to page 57 .
▷ Navigation, refer to page 172 : map views,
route criteria, voice output on/off.
▷ Night Vision with pedestrian detection, refer
to page
134 : selection of functions and type
of display.
▷ Daytime running lights, refer to page 90 :
current setting.
▷ Park Distance Control PDC, refer to
page
191 : adjusting the signal tone volume.
▷ Radio, refer to page 192 : stored stations,
station listened to last, special settings.
▷ Backup camera, refer to page 126 : selec‐
tion of functions and type of display.
▷ Side View, refer to page 130 : selection of
the display type.
▷ Language on the Control Display, refer to
page
87 .
▷ Lane departure warning, refer to page 102 :
last setting, on/off.
▷ Active Blind Spot Detection, refer to
page
104 : last setting, on/off.
▷ Triple turn signal activation, refer to
page
69 .
▷ Locking the vehicle, refer to page 37 : after
a brief period or after starting to drive.
Central locking system
The concept
The central locking system becomes active
when the driver's door is closed.
The system simultaneously engages and re‐
leases the locks on the following:
▷ Doors.
▷ Trunk lid.
▷ Fuel filler flap.
Operating from the outside
▷ Via the remote control.
▷ Via the driver's door lock.
▷ Via the door handles.
▷ Via the button in the trunk lid.
Seite 33
Opening and closing Controls
33
Online Edition for Part no. 01 40 2 607 879 - 09 11 490