BMW 2012 5 Series - Manual (Page 295)

5 Outside brake lamp
6 Rear reflector
Turn signal, outer brake, tail, and
license plate lamps
Follow the general instructions on lamps and
bulbs, refer to page
290 .
These lights are made using LED technology.
Contact your service center in the event of a
malfunction.
Lamps in the trunk lid
Access to the lamps
1. Remove the three screws using the screw
driver from the onboard vehicle tool kit.
2. Fold away the cover.
Inside brake lamp
Follow the general instructions on lamps and
bulbs, refer to page
290 .
21-watt bulb, H21W
The illustration shows the position of the bulb in
the installed bulb holder.
Squeeze the clips together and remove the bulb
holder.
Press the bulb into the bulb holder, turn coun‐
terclockwise and remove.
Reversing lamp
Follow the general instructions on lamps and
bulbs, refer to page
290 .
16-watt bulb, W16W
The illustration shows the position of the bulb in
the installed bulb holder.
Seite 295
Replacing components Mobility
295
Online Edition for Part no. 01 40 2 607 879 - 09 11 490