Casio EX-F1 - Manual (Page 130)

130
Using the Camera with a Computer
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4) only. Use
the standard USB driver that comes with your supported operating system.
.
To connect the camera to your computer and save files
1.
Turn on the camera and press [MENU].
2.
On the “Set Up” tab, select “USB” and then press [6].
3.
Use [8] and [2] to select “Mass Storage”, and then press [SET].
Using the Camera with a Macintosh
When you want to do this:
Operating
System
Version
Install this software:
See
page:
Save images to your
Macintosh and view them
there manually Mac OS 9
Installation not required. 130
Mac OS X
Save images to your
Macintosh automatically/
Manage images
Mac OS 9
Use commercially available
software.
132
Mac OS X
Use iPhoto, which comes
bundled with your operating
system.
Play movies
(Excluding Full HD movies)
• Full HD movie playback
is not supported (as of
January 2008).
Mac OS 9 Playback not supported. 133
Mac OS X
Movie file playback is supported
under OS X v10.3.9 or higher
when QuickTime 7 or higher is
installed.
133
Connecting the Camera to Your Computer and Saving Files