Casio EX-F1 - Manual (Page 18)

18
Quick Start Basics
1.
Remove the lens cap and then press [r] (REC) to turn on the camera.
2.
Set the mode dial to t (Auto).
3.
Set the CS dial to t (Single Shot).
• You can use either monitor screen or viewfinder to compose the image. Each
press of the [EVF/LCD] button cycles through the available monitor screen and
viewfinder on/off settings (page 146). If the image in the viewfinder appears
blurry, use the diopter dial to adjust it.
4.
Point the camera at
the subject.
You can zoom the
image, if you want.
5.
Half-press the shutter
button to focus the image.
When focus is complete, the
camera will beep, the back
lamp will light green, and the
focus frame will turn green.
To shoot a snapshot
Snapshot mode icon [r] (REC)
Shutter button
Monitor screen
Viewfinder
Mode dial
CS dial
Diopter dial
[EVF/LCD]
z
Telephoto
w
Wide Angle
Zoom controller
Focus frame
Back lamp