Casio EX-F1 - Manual (Page 22)

22
Quick Start Basics
If memory becomes full, you can delete images you no longer need in order to free up
storage and record more images.
• Remember that a file (image) delete operation cannot be undone.
• For information about images recorded using continuous shutter (CS), see page
99.
1.
Press [p] (PLAY) to enter the PLAY mode
and then press [2] (
).
2.
Use [4] and [6] to scroll through the files
until the one you want to delete is displayed.
3.
Use [
8
] and [2] to select “Delete” and then
press [SET].
• To delete other files, repeat steps 2 and 3.
• To exit the delete operation, press [MENU].
• If a CS group (page 97) is displayed when you perform the above procedure,
all of the images in the currently display CS group will be deleted.
1.
Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ).
2.
Use [
8
] and [2] to select “All Files Delete” and then press [SET].
3.
Use [
8
] and [2] to select “Yes” and then press [SET] to delete all files.
This will cause the message “There are no files” to appear.
Deleting Images
To delete a single file
To delete all files