Casio EX-F1 - Manual (Page 28)

28
Snapshot Tutorial
The control panel can be used to configure camera settings.
1.
In the REC mode, use [8]
and [2] to select the
setting you want to
change.
This will select one of the
control panel icons and
display its settings.
* Image quality cannot be changed using the control panel.
2.
Use [4] and [6] to change the setting.
• You also can change this setting using the control dial.
3.
If you want to configure another setting, repeat steps 1 and 2.
4.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can configure settings other than those listed above (page 77).
Using the Control Panel
1
9
5
3
4
7
8
2
6
Control panel
[SET]
[8] [2] [4] [6]
Control dial
1 Image size/Quality* (pages 29, 87)
2 Flash mode (page 31)
3 ISO sensitivity (page 34)
4 White balance (page 34)
5 EV shift (page 36)
6 Metering mode (page 37)
7 AF area (page 37)
8 REC light (Single Shot mode) (page 39)
Continuous shutter (CS) speed (High-speed CS, Prerecord (Still image), Flash
CS modes) (pages 48, 50, 52)
Bracketing mode (Bracketing mode) (page 54)
View speed (Slow Motion View mode) (page 53)
9 Date/Time (page 39)
Prerecord (Still image) Time (Prerecord (Still image) mode) (page 50)
Flash continuous shutter (CS) images (Flash CS mode (with flash)) (page 49)