Buick 2009 Enclave - Manual (Page 187)

Setting the Clock
The vehicle has an analog clock
and a digital radio clock. The digital
radio clock can be enabled or
disabled.
Enabling/Disabling the Digital
Radio Clock
To enable or disable the radio clock
display:
1. Press
H
until the clock and date
setting menus appear.
2. Press the pushbutton located
under the forward arrow label
until the menu for default
clock and date settings appear.
3. Press the pushbutton located
under the currently displayed
status of either ON or OFF to
toggle the radio clock display on
or off. The ON display indicates
the radio clock display is disabled
and the OFF display indicates the
radio clock display is enabled.
• If the radio clock display
is turned on, the screen
displays Radio Clock ON
for 10 seconds, then returns
to the original clock
display menu.
• If the radio clock display
is turned off, the screen
displays Radio Clock OFF for
10 seconds. The menus for
clock and date settings are
removed, and ON displays
as a current status indicating
that the clock display can be
turned on.
If the radio clock and analog clock
are not synchronized. Use the
procedure below to synchronize
both clocks.
Adjusting the Time and Date
1. Turn the ignition key to
ACC/ACCESSORY or ON/RUN,
then press
O , to turn the
radio on.
2. Press
G
to display HR, MIN,
MM, DD, YYYY (hour, minute,
month, day, and year).
3. Press the pushbutton located
under any one of the labels to
be changed.
4. To increase the time or date, do
one of the following:
• Press the pushbutton below
the selected label.
• Press ¨ SEEK.
• Press \ FWD.
• Turn f clockwise.
5. To decrease the time or date, do
one of the following:
• Press © SEEK.
• Press s REV.
• Turn f counter-clockwise.
Instrument Panel 3-69