Memory seat and mirrors, Memory seat and mirrors -5 – Buick 2009 Enclave User Manual

Page 9

Advertising
background image

medium, and low and to turn the
cooled seat off. Indicator bars next to
the symbol designate the level of
cooling selected: three for high,
two for medium, and one for low.

z

(Heated Seat and Seatback):

To heat the entire seat, press the
button with the heated seat and
seatback symbol.

This symbol will appear on the
climate control display to indicate
that the feature is on. Press the
button to cycle through the
temperature settings of high,
medium, and low and to turn the
heated seat off. Indicator bars next
to the symbol designate the level
of heat selected: three for high,
two for medium, and one for low.

The heated and cooled seats will
be canceled after the ignition is
turned off. To use the heated and
cooled seat feature after the vehicle
is started, you will need to press the
appropriate seat button again.

Memory Seat and Mirrors

On vehicles with the memory
package, the controls are located
on the driver door.

1: Saves the seating position for
driver 1.

2: Saves the seating position for
driver 2.

S

: Recalls the easy exit position.

To save a position in memory:

1. Adjust the driver seat, including

the seatback recliner, both
outside mirrors, and the power
steering column to a comfortable
position.

See Outside Power Mirrors on
page 2-32
for more information.

Not all vehicles will have the
ability to save and recall
the mirror positions.

2. Press and hold button 1 until

two beeps sound to let you
know that the position has
been stored.

A second seating and mirror
position can be programmed by
repeating the above steps and
pressing button 2.

To recall the memory positions,
the vehicle must be in P (Park).
Press and release either button 1
or 2. The seat, outside mirrors, and
power steering column will move
to the position previously stored.
You will hear a single beep.

If the RKE transmitter is used to
enter the vehicle and the remote
recall memory feature has been
turned on, automatic seat and mirror
movement will occur. See “MEMORY
SEAT RECALL” under DIC Vehicle
Customization
on page 3-59 for more
information.

To stop recall movement of the
memory feature at any time, press
one of the power seat controls,
memory buttons, or power mirror
buttons.

Seats and Restraint System

1-5

Advertising