CAMCORP SWF with Externally Mounted Fan - Manual (Page 39)

7
Coupling
Safety
WARNING & SAFETY
REMINDER
Safety must be considered a basic factor in machinery operation at all times. Most accidents
are the result of carelessness or negligence. All rotating power transmission products are poten-
tially dangerous and must be guarded by the contractor, installer, purchaser, owner, and user as
required by applicable laws, regulations, standards, and good safety practice. Additional specif-
ic information must be obtained from other sources including the latest editions of American
Society of Mechanical Engineers; Standard A.N.S.I. B15.1. A copy of this standard may be
obtained from the American Society of Mechanical Engineers at 345 East 47th Street, New
York, NY 10017 (212-705-7722).
It is the responsibility of the contractor, installer, purchaser, owner, and user to install, main-
tain, and operate the parts or components manufactured and supplied by Sprocket &
Gear, Inc., in such a manner as to comply with the Williams-Steiger Occupational Safety Act
and with all state and local laws, ordinances, regulations, and the American National Standard
Institute Safety Code.
Guards, access doors, and covers must be securely fastened before operating any equip-
ment.
If parts are to be inspected, cleaned, observed, or general maintenance performed, the
motor driving the part or components is to be locked out electrically in such a manner
that it cannot be started by anyone, however remote from the area. Failure to follow these
instructions may result in personal injury or property damage.
CAUTION
NOTE: CATALOG DIMENSIONS
Every effort is made to keep all catalog dimensions and styles current in the catalog, however
from time to time, it is necessary because of manufacturing changes to alter stock products
dimensionally.
If any stock product dimension or style shown in this catalog is critical to your application
please consult factory for certification.
WARNING