Canyon CNP-WF511N2 - Manual (Page 27)

CNP-WF511N2 Wireless N PCI Adapter
23
Adapter uses. The channels available depend on the regulatory domain. If the adapter
finds no other ad hoc adapters, the channel that the adapter starts the ad hoc network with
will be selected automatically. The Adapter must match the wireless mode and channel of
the clients it associates.
¾ 802.11 Authentication Mode: Select which mode the Adapter uses to authenticate to an
access point:
•
Automatic causes the adapter to attempt authentication using shared, but switches it
to open authentication if shared fails.
• Open System enables an adapter to attempt authentication regardless of its WEP
settings. It will only associate with the access point if the WEP keys on both the
adapter and the access point match.
• Shared-key only allows the adapter to associate with access points that have the
same WEP key.
For infrastructure (access point) networks, click Preferred APs… to specify four access points
at most to the client adapter that attempts to be associated to the access points. The four
access points have different priorities; the frontal has the higher priority.
Figure 3-7
3.1.2.2. Remove a profile
1. Go to the Profile Management tab (shown in Figure 3-2).
2. Select the profile name in the Profiles List.
3. Click
Remove.
)
Note:
The profile being used can’t be removed.
3.1.2.3. Switch another Profile
1. Go to the Profile Management screen (shown in Figure 3-2).
2. Select the profile name required in the Profiles List.
3. Click
Activate.