Canyon CNP-WF511N2 - Manual (Page 37)

CNP-WF511N2 Wireless N PCI Adapter
33
Chapter 4 WPS Configuration
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
If the wireless card supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless card and router using either Push Button Configuration (PBC)
method or PIN method.
First, the WPS software should be installed. Insert the Resource CD into your CD-ROM drive
and select the corresponding driver of WPS configuration. Double click on the driver to load the
following screen.
Figure 4-1
Then, please follow the clue of the Operation System to complete the WPS installation. After
that, WPS function can be enabled. Here we will introduce two ways to configure the WPS (For
the configuration of WPS, here takes the Wireless Router of our company for example).
4.1 PBC (Push Button Configuration) method
1. Firstly, press the WPS button directly on the front panel of the Router shown in Figure 4-2.
Figure 4-2
2. Double click the icon on the desktop to open the WPS Utility and then you can see the
welcome screen shown as Figure 4-3. Click Next to continue. Then select Push the