Canyon CNP-WF511N2 - Manual (Page 34)

CNP-WF511N2 Wireless N PCI Adapter
30
Figure 3-17
4. If the connection is successful established, the following screen will appear, click close to
finish the connection.
Figure 3-18
3.3 For Windows 7
After the Adapter's driver has been installed, we have to use Windows WLAN Autoconfig to
establish a connection. Please follow the steps below.
1. Click the icon at the bottom of your screen in your system tray and then you will see
the available wireless network list. Select the SSID of your Access Point and click
Connect.