Canyon CNP-WF511N2 - Manual (Page 29)

CNP-WF511N2 Wireless N PCI Adapter
25
3.1.2.6. Scan Available Networks
1. Click Scan on the Profile Management screen (shown in Figure 3-2), the Available
Infrastructure and Ad Hoc Networks window will appear below.
2. Click Refresh to refresh the list at any time.
3. Highlight a network name and click Activate to connect to an available network. If no
configuration profile exists for that network, the Profile Management window will open the
General tab screen. Fill in the Profile name and click OK to create the configuration profile
for that network.
Figure 3-10
etwork. To add a new profile into the Auto Selected
will appear (shown in Figure 3-11) with a
list of all created profiles in the Available Profiles.
3.1.2.7. Auto Profile Selection Management
The auto selection feature allows the adapter to automatically select a profile from the list of
profiles and use it to connect to the n
Profiles list, please follow these steps.
1. On the Profile Management screen (shown in Figure 3-2), click Order Profiles….
2. The Auto Profiles Selection management window