Carl Goldberg GBGA1077 - Manual (Page 28)

28
3. Bolt the main gear in place using the 4mm x
25mm screws.
3.
Mount the axle to the landing gears.
4. Install the blind nut in the wheel pant using the
4-40 bolt to pull it into the hole.
Wheel Collars
Wheel Pant
Wheel
Landing Gear
5.
Mount the wheel pant on the landing gear
along with the wheel collars and wheels.
Center the wheel on the axle.
Use the 4-40 x 1/2” bolt to hold the wheel
pant to the gear.
Be sure to use thread lock on the bolts.
TAIL WHEEL INSTALLATION
1. Tail wheel package includes mounting hard-
ware.
2. Mount the bracket on the rear of the fuselage
using the #4 x 1/2” screws. Install only the
rear on first.