Cables to Go AVS815 - Manual (Page 15)

33
5. Press the "SET” button.
6. Switch on the television set connected to the AVS 840 Power
Receiver and select the AV input.
You will see the lettering "RF ID XXX" (XXX represents the code
currently set on the RC 815 remote-control unit).
7. Disconnect the mains adapter of the AVS 850 from the wall socket for
a moment and then insert it again.
8. Point the RC 815 remote-control unit at the AVS 840 Power Receiver
and press the "POWER” button.
Now press "POWER” and "SET” simultaneously.
(You have about 30 seconds time for Points 7 and 8). The display on
the television screen will now be "RF ID ABC” (ABC represents the
code you have now selected).
9. Test the connection by pressing "POWER” (you will only see a
glittering pattern on the television set).
10. Connect the AVS 850 Power Transmitter to the cable TV socket
again (see Point 7.1).