Cables to Go AVS815 - Manual (Page 6)

4. The AVS 850 Power Transmitter
24
Items included
1 Power Sender AVS 850 Power Transmitter
1 12 V plug-in mains adapter
1 RX 579 infra-red module
1 Cinch/Scart connecting cable
1 co-axial branch plug
1 co-axial cable
1 co-axial infra-red remote-control unit for cable tuner
1 aerial adapter
Control elements
1,433 MHz aerial
Receives the 433 MHz signals of the original remote-control unit
sent by radio from the AVS 840 Power Transmitter and passes
them on to the integrated cable tuner. The infra-red remote-
control signals are also passed on via the enclosed infra-red
module to the connected item, such as a video-recorder. The
aerial must be placed upwards when the unit is in operation.
2. Socket for RX 579 extension module
For connecting the RX 579 extension module, which remote-
controls the transmitter. The infra-red diode on the extension
module must be glued over the infra-red eye of the item being
controlled. Please note Point 3 here.
Control elements
Rear side
Plug-in mains adapter
AVS 850 Power Transmitter
RX 579 infra-red module
2 3 4 5 6 7
8 9 11
1
12
10
Cinch/Scart
connecting cable
Items included
Co-axial cable
Co-axial
branch
plug
Aerial
adapter