Flash-to-pass, Daytime running lamps (drl), Flash-to-pass -3 daytime running – CHEVROLET 2012 Express User Manual

Page 163: Lamps (drl) -3, Lighting 6-3

Advertising
background image

Black plate (3,1)

Chevrolet Express Owner Manual - 2012

Lighting

6-3

Flash-to-Pass

This feature is used to signal to the
vehicle ahead that you want
to pass.

If the headlamps are off or in the
low‐beam position, pull the turn
signal lever toward you to
momentarily switch to high beams.

Release the lever to turn the
high-beam headlamps off.

Daytime Running
Lamps (DRL)

DRL can make it easier for others to
see the front of the vehicle during
the day. Fully functional daytime
running lamps are required on all
vehicles first sold in Canada.

The DRL system comes on in
daylight when the following
conditions are met:

.

The ignition is on.

.

The exterior lamp control is in
the AUTO position.

.

The shift lever is not in P (Park).

.

The light sensor determines it
is daytime.

When the DRL are on, the taillamps,
sidemarker, instrument panel lights,
and other lamps will not be on.

The automatic headlamp system
automatically switches from DRL to
the headlamps depending on the
darkness of the surroundings.

To turn off the DRL, turn the exterior
lamp control to

O

and then release

it. For vehicles first sold in Canada,
the transmission must be in the
P (Park) position, before the DRL
can be turned off.

Advertising