36 vehicle care – CHEVROLET 2012 Express User Manual
Page 300
Black plate (36,1)
Chevrolet Express Owner Manual - 2012
10-36
Vehicle Care
5. Disconnect the electrical
connector.
6. Turn the bulb counterclockwise
one quarter turn to remove it
from the headlamp assembly.
7. Install the new bulb into the
headlamp assembly and connect
the electrical connector.
8. Reverse the steps to reinstall
the headlamp assembly.
To prevent headlamp vibration
and shortened bulb life, be sure
to insert the headlamp assembly
tabs in the slots at the lower
portion of the housing.
Sealed‐Beam Headlamp
A. Headlamp retainer screws
B. Headlamp retainer
C. Sealed‐beam headlamp bulb
1. Remove the four screws (A)
from the headlamp retainer (B).
Pull the retainer (B) out and set
it aside.
2. Pull the bulb (C) forward to gain
access to the electrical
connector.
3. Disconnect the electrical
connector (B) and remove the
headlamp bulb (A).
4. Reverse Steps 1 through 3 to
reinstall the headlamp.