Seats and restraints 3-51 – CHEVROLET 2012 Express User Manual

Page 99

Advertising
background image

Black plate (51,1)

Chevrolet Express Owner Manual - 2012

Seats and Restraints

3-51

1.1. Find the lower anchors for

the desired seating
position.

1.2. Put the child restraint on

the seat.

1.3. Attach and tighten the lower

attachments on the child
restraint to the lower
anchors.

2. If the child restraint manufacturer

recommends that the top tether
be attached, attach and tighten
the top tether to the top tether
anchor, if equipped. Refer to the
child restraint instructions and
the following steps:

2.1. Find the top tether anchor.

2.2. For the second, third, and

fourth row with
three-passenger seats only,
in the rear driver-side
seating positions, use
anchor point (A). For the
rear passenger-side seating
positions, use anchor
point (B).

For the center seating
positions, use anchor
point (B). Never install two
top tethers using the same
top tether anchor.

2.3. Route and tighten the top

tether according to your
child restraint instructions
and the following
instructions:

If the position you are using
does not have a headrest
or head restraint and you
are using a single tether,
route the tether over the
seatback.

If the position you are using
does not have a headrest
or head restraint and you
are using a dual tether,
route the tether over
the seatback.

Advertising