Vehicle messages, Battery voltage and charging messages, Brake system messages – CHEVROLET 2012 Camaro User Manual

Page 143

Advertising
background image

Black plate (35,1)

Chevrolet Camaro Owner Manual (Include Mex) - 2012

Instruments and Controls

5-35

Vehicle Messages

Messages displayed on the DIC
indicate the status of the vehicle or
some action that may be needed
to correct a condition. Multiple
messages may display one after the
other.

The messages that do not require
immediate action can be
acknowledged and cleared by
pressing SET/CLR. The messages
that require immediate action cannot
be cleared until that action is
performed. All messages should be
taken seriously and clearing the
messages does not correct the
problem.

Battery Voltage and
Charging Messages

BATTERY SAVER ACTIVE

This message displays when the
vehicle has detected that the battery
voltage is dropping beyond a
reasonable point. The battery saver
system starts reducing certain
features of the vehicle that you may
be able to notice. At the point that
features are disabled, this message
is displayed. It means that the
vehicle is trying to save the charge
in the battery. Turn off unnecessary
accessories to allow the battery to
recharge.

LOW BATTERY

This message is displayed when the
battery voltage is low. See Battery
on page 10‑35
.

SERVICE BATTERY
CHARGING SYSTEM

This message is displayed when
there is a fault in the battery
charging system. Take the vehicle to
your dealer for service.

Brake System Messages

BRAKE FLUID LOW

This message is displayed when the
brake fluid level is low; see Brake
Fluid on page 10‑34
.

RELEASE PARKING BRAKE

This message is displayed as a
reminder that the parking brake is
on. Release it before you attempt to
drive.

Advertising