CHEVROLET 2012 Camaro - Manual (Page 319)

Black plate (45,1) Chevrolet Camaro Owner Manual (Include Mex) - 2012 - 2nd - 11/16/11
Vehicle Care 10-45
3. Push in the new bulb assembly
to lock it into place.
4. Reconnect the electrical
connector to the bulb assembly.
The base model vehicle daytime
running lamps are the low beam on
the halogen headlamp. If one these
lamps fails, see Headlamps, Front
Turn Signal and Parking Lamps
(Uplevel Vehicle) on page 10‑43 or
Headlamps, Front Turn Signal and
Parking Lamps (Base Vehicle) on
page 10‑42 for replacement
information.
Fog Lamps
This vehicle may have fog lamps
which would be located in the front
fascia.
To replace one of these bulbs:
Base Model Shown, Uplevel and
ZL1 Similar
1. Locate the bulb assembly under
the front fascia.
2. Disconnect the electrical
connector from the bulb
assembly and pull out the bulb
assembly.
3. Push in the new bulb assembly
to lock it into place.
4. Reconnect the electrical
connector to the bulb assembly.
Taillamps, Turn Signal,
and Stoplamps
To replace a taillamp, turn signal,
or stoplamp bulb:
1. Open the trunk. See Trunk on
page 2‑9.
2. Remove the close out panel
retainers to gain access to the
bulb socket connectors.
3. Turn the bulb socket
counterclockwise to remove it.
4. Pull the old bulb straight out of
the bulb socket.