Power steering fluid (zl1 only), Washer fluid – CHEVROLET 2012 Camaro User Manual

Page 306

Advertising
background image

Black plate (32,1)

Chevrolet Camaro Owner Manual (Include Mex) - 2012 - 2nd - 11/16/11

10-32

Vehicle Care

To check the power steering fluid:

1. Turn the ignition key to LOCK/

OFF and let the engine
compartment cool down.

2. Remove the engine cover. See

Engine Cover on page 10‑11.

3. Wipe the cap and the top of the

reservoir clean.

4. Turn the cap counterclockwise

and pull it straight up.

5. Wipe the dipstick with a

clean rag.

6. Replace the cap and completely

tighten it.

7. Remove the cap again and look

at the fluid level on the dipstick.

When the engine is hot, the level
should be at the hot MAX level.
When the engine is cold, the
fluid level should be between
MIN and MAX on the dipstick.

What to Use

To determine what kind of fluid to
use, see Recommended Fluids and
Lubricants on page 11‑12
. Always
use the proper fluid.

Power Steering Fluid
(ZL1 Only)

The vehicle has electric power
steering and does not use power
steering fluid.

Washer Fluid

What to Use

When windshield washer fluid is
needed, be sure to read the
manufacturer's instructions before
use. If operating the vehicle in an
area where the temperature can fall
below freezing, use a fluid that has
sufficient protection against
freezing.

Adding Washer Fluid

Open the cap with the washer
symbol on it. Add washer fluid until
the reservoir is full. See Engine
Compartment Overview on
page 10‑6
for reservoir location.

Advertising