Programming transmitters to the vehicle, Battery replacement – CHEVROLET 2011 HHR User Manual

Page 118

Advertising
background image

Black plate (6,1)

Chevrolet HHR Owner Manual - 2011

Press and hold

L

for three seconds to sound the panic

alarm. The horn chirps and the headlamps and parking
lamps flash for 30 seconds. Press

L

again to cancel

the panic alarm.

Remote Rear Door Operation (Panel)

*

: Press and hold for about one second to open the

rear driver side door.

+

: Press and hold for about one second to open the

rear passenger side door.

Programming Transmitters to the
Vehicle

Only RKE transmitters programmed to the vehicle will
work. If a transmitter is lost or stolen, a replacement can
be purchased and programmed through your dealer.
When the replacement transmitter is programmed to
the vehicle, all remaining transmitters must also be
programmed. Any lost or stolen transmitters no longer
work once the new transmitter is programmed. Each
vehicle can have up to four transmitters programmed
to it.

Battery Replacement

Replace the battery if the KEY FOB BATT LOW
message displays in the DIC. See “KEY FOB BATT
LOW” under DIC Warnings and Messages on
page 4‑41
for additional information.

Notice: When replacing the battery, do not touch
any of the circuitry on the transmitter. Static from
your body could damage the transmitter.

To replace the battery:

1. Separate the transmitter with a flat, thin object

inserted into the notch on the side.

2. Remove the old battery. Do not use a metal object.

3-6

Advertising