Towing a trailer (manual transmission), Towing a trailer (manual transmission) -37, Leaving after parking on a hill – CHEVROLET 2011 HHR User Manual

Page 287: Maintenance when trailer towing, Engine cooling when trailer towing

Advertising
background image

Black plate (37,1)

Chevrolet HHR Owner Manual - 2011

3. When the wheel chocks are in place, release the

brake pedal until the chocks absorb the load.

4. Reapply the brake pedal. Then apply the parking

brake and shift into P (Park).

5. Release the brake pedal.

Leaving After Parking on a Hill

1. Apply and hold the brake pedal while you:

.

start the engine,

.

shift into a gear, and

.

release the parking brake.

2. Let up on the brake pedal.

3. Drive slowly until the trailer is clear of the chocks.

4. Stop and have someone pick up and store the

chocks.

Maintenance When Trailer Towing

The vehicle needs service more often when pulling a
trailer. See this manual's Maintenance Schedule or
Index for more information. Things that are especially
important in trailer operation are automatic transmission
fluid, engine oil, axle lubricant, belts, cooling system
and brake system. It is a good idea to inspect these
before and during the trip.

Check periodically to see that all hitch nuts and bolts
are tight.

Engine Cooling When Trailer Towing

The cooling system may temporarily overheat during
severe operating conditions. See Engine Overheating
on page 6‑29
.

Towing a Trailer
(Manual Transmission)

Do not tow a trailer if the vehicle is equipped with a
manual transmission.

5-37

Advertising