Tire sealant and compressor kit storage, Changing a flat tire – CHEVROLET 2011 HHR User Manual

Page 368

Advertising
background image

Black plate (80,1)

Chevrolet HHR Owner Manual - 2011

4. Replace with a new canister which is available

from your dealer.

5. Push the new canister into place.

6. Screw the connector (B) to the canister (A).

7. Slide the plastic cover back on.

Tire Sealant and Compressor Kit
Storage

The tire sealant and compressor kit is located in the
rear compartment storage area.

1. Open the liftgate. See Liftgate on page 3‑12.

2. Lift the storage cover.

3. Turn the retainer clockwise and remove the tire

sealant and compressor kit.

To store the tire sealant and compressor kit, reverse the
steps.

Changing a Flat Tire

If a tire goes flat, avoid further tire and wheel damage
by driving slowly to a level place. Turn on the hazard
warning flashers. See Hazard Warning Flashers on
page 4‑3
.

6-80

Advertising