Clarity XLC Cordless 3.5HSB - Manual (Page 4)

4
XLC3.5HS/B
When using your telephone equipment,
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and injury to persons,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions
marked on the telephone.
3. Avoid contact with liquids. Do not
locate base unit or handset near
water, for example, near a bathtub,
wash basin, sink or laundry tub, in a
wet basement or near a swimming
pool.
4. Avoid using a telephone (other
than a cordless type) during a
storm. There may be a remote risk
of electrical shock from lightning.
5. Do not use the telephone to report
a gas leak in the vicinity of the leak.
6. Unplug this telephone from the wall
outlets before cleaning. Do not use
liquid cleaners or aerosol cleaners
on the telephone. Use a damp cloth
for cleaning.
7. Place this telephone on a stable
surface. Serious damage and/or
injury may result if the telephone
falls.
8. Do not cover the slots and openings
on this telephone. This telephone
should never be placed near or over
a radiator or heat register. This
telephone should not be placed in a
built-in installation unless proper
ventilation is provided.
9. Operate this telephone using the
electrical voltage as stated on
the base unit or in the owner’s
manual. If you are not sure of the
voltage in your home, consult your
dealer or local power company.
10. Do not allow anything to rest
on the power cord or locate
this product in an area where the
power cord is likely to be damaged
by furniture or foot traffic.
11. Do not overload wall outlets or
extension cords as this can increase
the risk of fire or electrical shock.
12. Never push any objects through
the slots in the telephone. They can
touch dangerous voltage points or
short out parts that could result in
a risk of fire or electrical shock.
Never spill liquid of any kind on
the telephone.
13. To reduce the risk of electrical
shock, do not take this phone apart.
Opening or removing covers may
expose you to dangerous voltages
or other risks. Incorrect reassembly
can cause electric shock when the
appliance is subsequently used.
14. Unplug this product from the wall
outlet and refer servicing to the
manufacturer under the following
conditions: when the power
supply cord or plug is frayed
or damaged; if liquid has been
spilled into the product; if the
telephone has been exposed to
rain or water; if the telephone has
been dropped or the case has been
damaged; if the telephone exhibits
a distinct change in performance;
if the telephone does not operate
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS