Operating instructions, Xlc3.5hs/b – Clarity XLC Cordless 3.5HSB User Manual

Page 9

Advertising
background image

9

E

N
G

L

I

S

H

XLC3.5HS/B

REGISTERING THE XLC3.5HS/HSB
The XLC3.5HS/HSB is compatible with select Clarity

products with ClarityLogic (see page 13 for compatible

products). In order to use the XLC3.5HS/HSB, you must

register it to a main unit.
Pull the handset’s battery tab located on the bottom of

the device, and then press MENU to start registering or

deregistering your handset from your system.

TO REGISTER AN UNREGISTERED HANDSET
1. Press MENU to enter registration mode. You will see

displayed on the screen, “Handset Needs Registra-

tion.”

2. Press and hold the FIND key on the main unit’s base

for five seconds, until the base visual ringer starts

flashing. Release FIND key on the main unit’s base.

3. Press MENU key on the handset.
4. The screen shows “Registering... ”, then “Registration

Successful” (accompanied by five quick beeps).

5. Your handset is now registered to your main system.

Your screen will display “Handset X,” (where “X” is

the number of the actual handset registered, such as

the second or fourth handset, etc.).

You can extend the number of handsets by using

additional XLC3.5HS/HSB handsets (sold separately) - up

to 4 handsets (total) can be registered to a main system.

TO REGISTER YOUR HANDSET AGAIN (or to

register to a different main system)
1. In standby mode, press MENU.
2. Press DOWN arrow five times to advance the row

reading “Phone Setup” to the top of the screen.

3. Press MENU to enter the setup section. The screen

displays “Register” on the screen’s top row now.

4. Press MENU to enter the Registration section.
5. Press MENU again to select “Register.”
6. Follow the Registration steps listed above.

TO DEREGISTER THE HANDSET
1. See the six steps listed above, then press MENU to

select “Deregister.”

2. Your handset will deregister from your base

as soon as you press MENU. The screen will

show “Handset X Deregistered”(again, where “X” is

the number of the handset registered), then “Handset

Needs Registration.”

Hold Base

For 5 Secs

FIND Key

Handset

Needs

Registration

Registering...

Registration

Successful

Register

Voice Asst

Auto Talk

Register

Deregister

Register

Register

Deregister

Register

HANDSET 1

Deregistered

OPERATING INSTRUCTIONS

Advertising
This manual is related to the following products: