Hot surface indicator light, Using the ceramic glass cooktop, Cookware tips – Whirlpool FES364B User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R R A N G E

Hot surface indicator light

The Hot Surface Indicator Light on the

control panel will glow when a surface unit

becomes too hot to touch. The Indicator

Light will continue to glow as long as the

surface unit is too hot to touch, even after

it is turned off.

Until you get used to the settings, use

the following as a guide.

For best results,

start cooking at the high setting; then turn

the control knob down to continue cooking.

SETTING

RECOMMENDED USE

HI

• To start foods cooking.

• To bring liquids to a boil.

MED-HI

• To hold a rapid boil.

• To fry chicken or

pancakes.

MED

• For gravy, pudding, and

icing.

• To cook large amounts

of vegetables.

MED-LO

• To keep food cooking

after starting it on a

higher setting.

LO

• To keep food warm until

ready to serve.

Using the ceramic glass
cooktop

Cooking on the ceramic glass cooktop is

almost the same as cooking on coil surface

units. There are, however, a few differences:

• The surface unit will glow red

when it is

turned on. You will see the element cycling

on (glowing red) and off - even on HIGH

setting - to maintain the proper tempera­

ture setting you have selected.

• Sliding metal pans

on ceramic glass

cooktop surface could leave marks. Wiping

off the cooktop before and after each use

will help keep the surface free from stains

and provide the most even heating. See

pages 25 and 26 for care and cleaning

suggestions.

Cookware tips

• Select a pan

that is about the same size

as the surface unit.

• NOTE: For best results and greater

energy efficiency,

use only flat-bottomed

cookware that makes good contact with

the surface units. Cookware with rounded,

warped, ribbed (such as some porcelain

enamelware), or dented bottoms could

cause uneven heating and poor cooking

results.

You can, however, use the newer

cookware available with slightly indented

bottoms or very small expansion channels.

This cookware is specially designed to

provide the good contact needed for best

cooking results.

Also, woks, canners, and teakettles with

flat bottoms suitable for use on your cook­

top are now available in most stores that

sell housewares.

• The pan

should have straight sides and

a tight-fitting lid.

• Choose medium to heavy gauge

(thick­

ness) pans that are fairly lightweight.

• The pan material

(metal or glass) affects

how fast heat transfers from the surface

unit through the pan material and how

evenly heat spreads over the pan bottom.

Choose pans that provide the best cooking

results.

Handles

should be made of sturdy, heat-

resistant material and be securely attached

to the pan.

• With your hand,

feel the bottom of your

pans while they are cool for nicks and

scratches. Nicks and scratches on pan

bottoms will scratch the ceramic glass

cooktop.

Make sure bottoms

of pans are clean and

dry before using on cooktop.

Avoid spillovers

on cooktop. Use pans

with tall sides.

Do not

cook food directly on cooktop.

• Do not leave

an empty utensil, or one

which has boiled dry, on a hot surface unit.

The utensil could overheat and could

damage the utensil or surface unit.

Advertising