Removing the meat drawer and cover, To remove the cover, Adjusting the meat drawer temperature – Whirlpool FREEZERS User Manual
Page 12: Removing the freezer bin/basket, On some models), To remove the bin/basket
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR REFRIGERATOR
Removing the meat drawer and cover
To remove the meat drawer:
Pull out to the stop, lift
1. Slide the meat drawer straight out to
the stop.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove the crisper, the crisper cover,
and the meat drawer.
2. Tilt front of cover up.
3. Lift cover at back and pull straight out.
4. Replace in reverse order.
Adjusting the meat drawer temperature
Cold air flows from the freezer into the meat
drawer. This helps keep the meat drawer
colder than the rest of the refrigerator for
better storage of meats.
Slide the control from side to side to let
more or less cold air through.
Removing the freezer bin/basket
(on some models)
To remove the bin/basket:
1. Slide out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the bin/basket:
1. Place on the slides.
2. Make sure the wire stops clear the front
of the slides.
3. Slide in all the way.
Pull out to the stop, lift the
front, and pull again.
12
I c ALL;a è;?iTìl?fCTi^c^
W I T H Q U E S T I O N S O R C O M M E N T S