Removing the base grille, Changing the light bulbs, Electrical shock hazard – Whirlpool FREEZERS User Manual
Page 21: To change refrigerator light, Changing the light-^elbs, Awarning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR REFRIGERATOR
Removing the base grille
To remove the grille:
1. Open both doors.
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal
clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 25.
Metal
clips
Condenser coils
Base
grille
Support
tabs
Changing the light bulbs
AWARNING
Electrical Shock Hazard
Unplug the refrigerator before
removing light bulb.
Failure to do so can result in death
or electrical shock.
To change refrigerator light:
1. Unplug the refrigerator.
2. Reach behind the Control Console to
remove bulb.
3. Replace bulb with a 40-watt appliance
bulb.
4. Plug in the refrigerator.
21