Installing it properly, Leveling it – Whirlpool FREEZERS User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BEFORE USING YOUR REFRIGERATOR
Installing it properly
1. Allow V
2
inch (1.25 cm) space on each
side and at the top of the refrigerator for
ease of installation.
2. If the refrigerator is to be against a wall,
you might want to leave extra space on
the hinge side closest to the wall so the
door can be opened wider.
3. The refrigerator can be flush against the
wall.
Leveling it
Your refrigerator has two front leveling
screws - one on the right and one on the
left. To adjust one or both of these, follow
the directions below.
1. Remove base grille. (See page 21.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock
wise.
4. Check with level.
5. Replace base grille. (See page 21.)
Front
roller
Right to raise;
left to lower
Use a screw
driver to adjust
Raise
Lower