Chicago Faucets Plumbing Product - Manual (Page 7)

7
Geberit Tessera TM Toilet System
Installation & Maintenance Instructions
WALL HUNG BOWL INSTALLATION
5
6
7
8
1. Remove clear plastic sleeves fom threaded
rods.
2. Adjust rods to protrude 3” from finished wall
surface.
3. Secure rods to carrier frame using hex nuts
(provided).
1. Lubricate rubber seals with lubricant
provided.
Do not use plumbers putty or Silicone
sealant.
2. Install both adapters into appropriate wall
side hub.
1. Place the bowl onto the fixture rods.
2. Install cap retainers (1), washers (2) and
nuts (3). Secure bowl with nuts, handtight
only.
Note: Cap retainers (1) should be installed with
the larger end facing up.
3. Level the bowl, then tighten nuts.
DO NOT OVERTHIGTEN NUTS.
4. Snap caps over cap retainers (4).
3"
1"
up
1
2
3
4
9
Note:
Sound barrier pad
optional, separate
order required.
Caulk gap around
bowl with water-
proof sealant.