Whirlpool Freezer - Manual (Page 5)

CONTROL PANEL DESCRIPTION
The control Panel is located at the top front of the refrigerator compartment.
Temperature Controls
For your convenience, your temperature controls are preset at the factory. When you first install your
refrigerator, make sure the controls are still set to the recommended set points as shown.
Recommended Settings
Warmer
Q
Colder
№ ra
FREEZER
IMPORTANT:
• Wait 24 hours for your refrigerator to cool
completely before adding food. If you add food
before the refrigerator has cooled completely,
your food may spoil.
• If the temperature is too warm or too cold in the
refrigerator or freezer, first check the air vents to
be sure they are not blocked before adjusting the
controls. See “Ensuring Proper Air Circulation”.
To Turn Your appliance Off/On:
• Press the freezer (+) touch pad repeatedly until
“OFF” appears in the freezer display. Allow a few
seconds for the refrigerator to shut off. Neither
compartment will cool.
• Press either the refrigerator or freezer (-) touch
pad to turn on the appliance.
REFRIGERATOR
Warmer
Colder
Adjusting Controls
The REFRIGERATOR control adjusts the
refrigerator compartment temperature. The
FREEZER control adjusts the freezer compartment
temperature. If you need to adjust the temperature
in either the refrigerator or freezer compartment,
use the settings listed in the chart as a guide.
To Adjust Set Point Temperatures:
• Press the (+) or (-) touch pads until the desired
temperature set point is displayed.
NOTE: Except when first turning on the refrigerator,
do not adjust either temperature control more than
one setting at a time. Wait 24 hours for the
temperature to stabilize between adjustments.
Warmer
REFRIGERATOR
Colder
196