Using the oven control, Baking – Whirlpool SB130PER User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Oven Control
The oven control is used to control the upper oven temperature or to broil in
the lower broiler oven. Baking and broiling can not be done at the same time.
Baking
Racks should be placed so the top
of the food will be centered in the
oven. Always leave at least IVi to 2
inches (4-5 cm) between the sides
of the pan and the oven walls and
other pans. For more information,
see the "Cooking Guidel'
1. Position the racks properly
before
turning on the oven.
To change
rack position,
pull rack out to
stop, raise front edge and lift out.
2.
Set the Oven Control to the baking
temperature you want. The oven
burner will automatically light in
50-60 seconds.
3.
Preheat the oven fortO minutes
before adding food.
NOTE: Oven
racks, walls and door will be hot.
Do not place food directly on
oven bottom.
4.
During baking, the oven burner
will turn on and off to maintain the
temperature setting.
5.
When baking is done, turn the
Oven Control to OFF.
WARNING: If the flame should go out while cooking, or if
there is a strong gas odor, turn the oven burner OFF. Wait five
minutes for gas odor to disappear before relighting burner. IF
GAS ODOR IS STILL PRESENT, SEE SAFETY NOTE ON PAGE 2.