Chariot Carriers Babya Carrier - Manual (Page 6)

RAIN COVER
ELASTIC LOOP
BACK PANEL
During cooler temperatures use the rain cover to keep your child warmer. For more ventilation, roll up the rain cover and secure it by looping the
elastic loops around its ends. If it is bright outside or the sun is bothering your child, use the back panel as a sunscreen. To do so, remove the
weather cover, flip the back panel over the front of the carrier, secure it to the Velcro tabs located on the upper frame, and re-install the weath-
er cover. .
5 5
1.2 Handlebar Instructions
Depress both spring buttons and insert the
handlebars fully into the sleeves. Both spring
buttons must “pop” out of the holes located
on the inner side of the sleeves to secure
the handlebar in place. Insert both ends of the handlebar into the
aluminum sleeves located at the upper rear
section of the carrier.
WARNING: Failure to properly install the
handlebars or use the wrist safety strap
could cause the carrier to become separated
from you resulting in serious injury.
Secure the front of the handlebar bag to the
clip on the back of the carrier’s cover. Wrap
the two web strap on the back of the bag
around the carrier’s handlebar and secure
them using the clips.
CAUTION Do not place more then 0.5kg/1 lb
in the handlebar bag. when used on the carri-
er. Overloading this bag can cause the carrier
to tip.
1.3 Weather Cover Features
Fasten the front corners of the weather cover
to the Velcro tabs located on the front lower
corners of the frame. Attach the loops from the back corner of the
weather cover over the aluminum sleeves
located at the upper rear section of the carrier.
Note: Your Chariot Carrier has climate
control features designed to regulate
your child’s temperature. Periodically
monitor your child to ensure that he/she
is comfortable in terms of temperature.
WARNING: Failure to use the weather
cover could expose your child to flying
rocks, insects, and other debris.
(CX model only)