Rmdl, Answerer operation – GE 2-9876 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ANSWERER OPERATION

If the message indicator reads “------------ ”, tap ANSWER ON
button to turn answerer on.

When the system answers a call, the caller hears the
selected outgoing announcement followed by a beep.

After the caller leaves a message, the answerer notes the
time and day at the end of the message. The message is

stored in the selected mailbox and the MESSAGES window
displays the total number of messages currently stored in the
answerer.

1

.

The Auto Disconnect Feeture

Lifting the HANDSET on any telephone on the same line
while the answerer is recording a phone message will
automatically interrupt and stop the answerer portion of
the unit. This allows you to screen your c^ls (see page

16.)

2. The Super "VOX“ Feature

Super VOX is a sound recognition feature built into the
electronics of your answerer. This feature saves memory
space by hanging up when; the caller hangs up; it hears

a dial tone; or, call progress signals (computer or FAX
signals) are heard.

Note: Message recording will be terminated in any one

of the following conditions:

1. The STOP button is pressed.

2. An extension phone is picked up.
3. Super VOX times out.
4. The maximum message length time is reached

(2 minutes or 4 minutes).

5. Recording memory is full (14 minutes total).
6. Dial tone is detected.

2.

Setting the INCOMING MESSAGES switch on the back

of the Answerer to 2 MINUTE position allows the caller to

leave messages up to 2 minutes in length.

Setting the INCOMING MESSAGES switch on the back

of the Answerer to 4 MINUTE position allows the caller to

leave messages up to 4 minutes in length.

H.

Automatic

Answering
Operation

ANSWER ON

I.

Setting The
Answerer

For

Incoming

Messages

Time Limit

INCOAKNG

tteSSAGSS

rMDl

mm/Tt

MMure

15

Advertising