GE 2-9876 - Manual (Page 22)

REMOTE OPERATION
When you call your GE Model 2-9876 Answerer from another
location, using a touch tone phone you can enter your three
digit security code. (This code is factory preset and written
on the bottom of the unit.) You may then listen to your
messages or enter a command to request one of the other
features normally available to you at home.
Note: Remote operation can be terminated locally by
pressing the STOP button or by picking up any phone on the
same line.
A.
Introduction
and
Security
Code
Information
From a remote location you can bypass the outgoing
announcement (OGA) that you have recorded on the
Answerer. Press any key on the touch tone phone from
which you are calling. The OGA will stop and the Answerer
will emit a transfer tone after which you may leave a
message or enter your 3-digit security code to access other
remote operations.
Note: While pressing any key will bypass the OGA, pressing
keys 1, 2, or 3 will also take you directly into a mailbox to
record. If you do not wish to leave a message at this time,
avoid these keys when bypassing the OGA.
B.
Outgoing
Annouce*
ment (OGA)
Bypass
22