GE PHP900SMSS - Manual (Page 7)

Installation Instructions
ELECTRICAL CONNECTIONS
NEW CONSTRUCTION AND BRANCH
CIRCUIT CONNECTION
AWARNING:^
Improper connection
of aluminum house wiring to copper leads
can result in an electrical hazard or fire. Use
only connectors designed forjoining copper
to aluminum and follow the manufacturer's
recommended procedure closely.
1
U'T'gi
f
16<
Min.
Installjunction box
so that it can be
reached through
the front of the
cabinet.
When making the wire
connections, use the
entire length of conduit
provided. The conduit
must not be shortened
(unless required by local f
codes). The conduit length
is 4 ft. With the cooktop
in place, open the front of
the cabinet door. Insert
the wires from the conduit
through the opening of
thejunction box. The
conduit strain relief clamp
must be securely attached to thejunction box and
the flexible conduit must be securely attached to
the clamp.
• When installing in new construction, or
• When installing in a mobile home, or
• When installing in a recreational vehicle, or
• When local codes do not permit grounding
through neutral:
a. Insert conduit through strain relief and tighten.
b. Attach the appliance grounding lead (green
or bare copper) in accordance with local codes.
If the residence grounding conductor is
aluminum, see WARNING.
THREE-CONDUCTOR BRANCH CIRCUIT
CONNECTION
When connecting to a three-conductor branch
circuit, if local codes permit:
a. Connect the cooktop green ground conductor
lead to the branch circuit ground (green) using
a wire nut.
b. Connect the cooktop red lead to the branch
circuit red lead in accordance with local
codes, using a wire nut.
c. Connect the cooktop block lead to the
branch circuit block lead in accordance with
local codes, using a wire nut. If the residence
red, block or white leads ore aluminum
conductors, see WARNING.
d. Install Junction Box Cover.