Installing the cooktop, H protect surface of cooktop, H install baffle – GE PHP900SMSS User Manual
Page 8: H attach foam tape, H install hold-down brackets, Installation instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation Instructions
INSTALLING THE COOKTOP
[H PROTECT SURFACE OF COOKTOP
Place a towel or tablecloth onto the countertop.
Lay the cooktop upside down onto the protected
surface.
Bottom of Cooktop
cloth under Cooktop
H INSTALL BAFFLE
Secure the baffle to the cooktop with screws.
NOTE: Do not install the baffle when the cooktop
H ATTACH FOAM TAPE
Apply the foam tape around the outer edge of the
glass. Do not overlap the foam tape.
Bottom of Cooktop
\
Cooktop
Glass
NOTE: On stainless steel models, apply foam tape
on the sides and rear.
is installed over a single oven.
II
1
)
f >
L \
H INSTALL HOLD-DOWN BRACKETS
Start one screw through the bracket and into
the cooktop. (Both sides.) Do not tighten. Turn
the bracket inwards to avoid interference when
dropping the cooktop into the countertop.