Cisco 1751 - Manual (Page 82)

Appendix D Installing the Virtual Private Network Module
Installing the VPN Module in a Cisco 1751 Router
D-6
Cisco 1751 Router Hardware Installation Guide
78-11258-04
Step 6 Place the router bottom on an antistatic mat and begin installing the VPN module.
Installing the VPN Module
Follow the steps in this section to install the VPN module.
Step 1 The VPN module plugs into a socket, as shown in Figure D-2 .
Step 2 Using two of the screws provided, attach the standoffs to the 1751 motherboard.
a. Locate the holes in the motherboard.
Figure D-2 Cisco 1751 Standoff Location
b. Turn the motherboard over and attach the standoffs to it using two of the
screws provided as shown in
Figure D-3 .
50192
Motherboard
standoff holes
VPN module
socket