Kenmore 41003 - Manual (Page 20)

USING YOUR REFRIGERATOR
Dispenser Controls
The last three buttons on the control panel control the
dispenser functions. These buttons include Accent
Lighting around the dispenser (1), Ice Type/lce Off (2),
and Water dispensing (3).
\
■a Slide
Home Show
Child
Lock
НОШ 3 ЙС Lighting
ice Type
Water
FOSKEOfF
1
Cooling oft
Using the Dispenser Lighting
Dispenser lighting turns ON whenever the dispenser is
operating. Five seconds after the dispenser stops
dispensing, the lighting turns OFF.
Using the Dispenser Accent Lighting
1. Press the Accent Lighting button to have the accent
lamp stay on.
NOTES:
• Light OFF is the default mode. The accent lamp
stays off.
• Light ON allows the accent lamp to stay on.
• The accent lamp turns off whenever the dispenser
is operating. Five seconds after the dispenser stops
dispensing, the accent lamp turns back on.
2. Press the Accent Lighting button a second time to
turn off the accent lamp.
Turning Off the ice Dispenser
The Ice Type/lce Off button controls two functions. The
length of time the control is held determines which
function it controls.
1
.
Press and hold the Ice Type/lce Off button for more
than 3 seconds to turn OFF the icemaker. “Ice Maker
Off” will show on the display.
2
.
NOTE: Pressing the Ice Type/lce Off button for less
than 3 seconds will toggle the type of ice being
dispensed.
Press the Ice Type/lce Off button for more than
3 seconds to restart ice production.
Seiecting and Dispensing ice
1
.
Press the Ice Type/lce Off button for less than 3
seconds. The screen will show “Dispenser Active
Cubed” or “Dispenser Active Crushed.” Pressing the
Ice Type/lce Off button for less than 3 seconds again
will toggle between the selections.
/ S
'
Slide
Home Show 1
Cooling off
HOI D3 SEC
Child
J
Lighting
Water
2. Place glass in dispenser to dispense selected ice.
NOTES:
• The dispenser always defaults to the last setting
that was used (Ice or Water).
• The selected dispenser function will be displayed as
the ice is being dispensed.
20