Cleaning behind the refrigerator, A warning, Electric shock hazard – Kenmore 41003 User Manual

Page 45: Replacing the interior lights, Changing the water filter, A caution, Care and cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CARE AND CLEANING

Cleaning Behind the Refrigerator

A WARNING

Electric Shock Hazard

Do not remove the back cover. Doing so could cause

an electric shock resulting in death, personal injury,

or damage to the appliance.

To keep the cords and exposed parts free of dust and dirt

accumulation, vacuum behind the appliance once or twice
a year.

llp-2^s^

^

riniiiiilii

I

E

iiifflUIiniuP

111 æSrâsaw 11y 0 Iflimiril

REPLACING THE INTERIOR LIGHTS

A WARNING

Electric Shock Hazard

Do not attempt to replace any interior lights. Doing so

could cause an electric shock resulting in death,

personal injury, or damage to the appliance.

The interior lighting for this model uses LED lighting.

DO NOT try to change an LED. LED lighting should only
be replaced by a qualified Sears service technician.

LED Lights,

r

-—h

^ Ψ 1

I--'

t

/ 1

CHANGING THE WATER FILTER

To check the condition of the water filter, press the Home

button and then touch the Water Filter button on the top
right of the touch screen. The current water filter status

will be displayed on the screen followed by step-by-step

servicing instructions. (See page 29.)

,

£;

—-

l

SS

-

w...

A CAUTION

1

.

2

.

DO NOT use the water or ice dispenser without a

water filter cartridge because the water line may

become blocked or damage the dispenser.

Remove the replacement water filter from the box and

apply the appropriate month indicator sticker as
shown. The sticker should show the month 6 months

in the future. The normal filter life is about 6 months.

Remove the protective cap from the top of the new

filter.

3. Remove the old filter by turning it counterclockwise

and pulling down to remove it from the filter housing.

4. Position and insert the new filter into the filter housing.

5. Slowly turn the water filter clockwise to lock the filter

in place and align it with the printed mark on the

cover. Do not overtighten.

NOTE: Be sure to flush 3 gallons (11.4 liters) (approximately

6 minutes). This purges any air in the water lines that

could cause the dispenser to drip.

45

Advertising
This manual is related to the following products: