Self-cleaning, Dcdcd, 30 [in – Kenmore 790.7937 User Manual

Page 33: I-nn in

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Self-Cleaning

Setting Flex Clean

Setting Delay Flex Clean

The

FLEX CLEAN

pad is used to start a Self-Cleaning cycle. When used with the

DELAY START

pad, a

delayed Self-Cleaning cycle may also be programmed. The

FLEX CLEAN

feature allows for any Self-Cleaning cycle time

from 2 (2:00) to 4 hours (4:00) to be selected. You may also choose the clean time in 1 minute increments (for example 2

hours and 50 minutes) by pressing the number keypads (^^2

)( 0

During the Self-Cleaning cycle, the outside of the range can become very hot to the touch.

DO NOT

leave

small children unattended near the appliance.

DO NOT

force the oven door open. This can damage the automatic door locking system. Use care when

opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or
steam to escape. The oven may still be

VERY HOT.

INSTRUCTIONS

PRESS

DISPLAY

To start an immediate Self-Cieaning cycle or to set a delay start
time of 9:00 o’clock and shut off automatically (example

provided is a default 3 hour Self-Clean cycle):

1

.

2

.

Be sure the clock is set with the correct time of day, the oven
is empty and the oven door is closed.

Press

2:00 to 4:00 using

number pads

CLEAN"

will flash,

"3:00"

(hours) and the

Cooktop locked icon will show in the display (See Fig. 1). 2-4
hours of Self-Cleaning time may be choosen by pressing any

amount of time from

(2 hours) through

(4 hours) in one minute increments. You

may also skip the time entry and accept the default cleaning

time of 3 hours by pressing the Start key pad (See Step 3).

3. Press .The

"DOOR LOCKED"

icon will flash;

"CLEAN",

Cooktop Lockout icon and the letters

"CLn"

will remain on in

the display (Fig. 2).

4. As soon as the control is set, the motor driven oven door lock

will begin to close automatically. Once the door has been

locked the

"DOOR LOCKED"

indicator light will quit flashing

NOTE: If the optional delay Self-Clean feature is needed, finish steps 5-7. If Self-Clean is started immediately skip the remaining
steps and continue with “When the Self-Clean cycle is done” on the following page.

3.00

DOOfI LOCKED CLEAN 3

CLn

Fig.l

1-ЭП

Г1 «

t J U

L L

Л

0ОСШ LOCKED O.EAN

Q

Fig.

2

1:30

[in

DOOR LOCKED CLEAN S

Fig-3

and remain on. The Cooktop locked icon will remain on (Fig. 3),

5. Press (See Fig. 4). Enter the desired Self-Clean starting

time using the number pads

(See Fig. 5).

6. Press

"CLn"

icon will turn off;

"DELAY", "DOOR

LOCKED", "CLEAN"

and Cooktop locked icons will remain on.

7. The control will calculate forward from the set start time to

determine when the Self-Cleaning cycle should end. The Self­

Cleaning cycle will turn on automatically at the set time. At that

time the icon

"DELAY"

will go out; the oven icon will come on,

the start time. Cooktop locked icon,

"CLEAN"

and

"CLn"

will

remain in the display (See Fig. 6).

rlSawk

ySTARTy

Л * П Л r i _

U - U U L L H

(DCDCD

DOC»1 LOCKED CLEAN

3

Fig. 4

Q - n n

n

^

J ' U U L L П

DELAY Д

DOLHI LOCKED O.EAN Ш

Fig. 5

i-nn In _

I • ^ и ——. Lk i» ^

ООСЖ LOCKED (XEAN I

Fig. 6

33

Advertising
This manual is related to the following products: