Suction control, Performance indicator, Therivial protector – Kenmore 116.25812 User Manual

Page 13: Power-mate® storage, Stair grip, Wand light

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SUCTION CONTROL

The suction
control allows

you to change
the vacuum
suction for
different fabrics
and carpet
weights,

LOW POWER

decreases suction

for draperies and lightweight rugs, while

HIGH

increases suction for upholsteries and

carpets.

PERFORMANCE INDICATOR

I

ijnr*rO£i

Suction

Decrease

Suction

Performance
indicator

When

the vacuum

cleaner is running
with normal airflow,

the light on the
performance
Indicator is off. The
light comes on
whenever the
airflow becomes blocked. If that occurs,

check the disposable dust bag. motor
safety filter and other possible clog
locations shown in

HOW YOUR VACUUM

CLEANER WORKS.

To correct problem:

See the

TROUBLE­

SHOOTING

table.

NOTE:

The light may come on when using

certain attachments, due to reduced airflow

through attachment.

THERiVIAL PROTECTOR

This vacuum cleaner has a thermal
protector which automatically trips to protect
the vacuum cleaner from overheating If a
clog prevents the normal flow of air to the
motor, the thermal protector turns the
motor off automatically. This allows the
motor to cool in order to prevent possible
damage to the vacuum cleaner.

To correct problem:

Turn the vacuum

cleaner off and unplug the power cord
from the outlet to allow the vacuum
cleaner to cool and the thermal protector
to reset.

Check for and remove clogs, if

necessary. Also check and replace any
clogged filters. Walt approximately

thirty (30) minutes and plug the vacuum
cleaner In and turn back on to see if the
motor protector has reset.

POWER-MATE® STORAGE

The wand has a “U” shaped
flange that slides into
the “U” shaped slot on
the canister.

The flange allows the
wands and Power-

Mate®io be stored with

the canister to
conserve storage
space. The canister
must be stored on end for
this feature to be used.

To attach the Power-Mate®, it must be in
the fiat position as shown in the

illustration. Use the handle release pedal

to place it in this position

The wand will slip out of the slot as it is lifted
up for use and wiil slide into the slot as it is
lowered for storage.

STAIR GRIP

During normal operation while the canister is
In the horizontal position, the caster wheel
rotates freely 360"

The Stair Grip
feature allows
the caster
wheel to lock in
position when
the vacuum

cleaner Is

rotated 25"

from horizontal Into a vertical position in
order for the canister to rest on stairs.

WAND LIGHT

This vacuum cleaner Is
equipped with a light on the
extension wand. This light

will operate only when the
vacuum cleaner is in

CARPET

mode (see

HOW

TO START),

The light will

operate when attached or not
attached to the Power­
Mate®.

The light can be used for lighting hard to
reach locations.

13

Advertising